NXP BYQ-28E IC
NXP BYQ-28E IC
Rs. 50.00
- Stock: 2
- Model: NXP-BYQ-28E-Ic
- SKU: PL-695
Hot
Resistor Box
Assorted collection of Resistors. This Resistor Box contains a total of 150 Resistors.
The following Resistors values are available 5 ..
Rs. 35.00
Hot
Relay - 10A - 5V DC (RW-SH-106D)
Basic Specs:
5V DC
10A/24VDC
12A/120VAC
5A/250VAC
Detailed Specs
RW / RWH
Click and drag to move
Ou..
Rs. 26.00
The TCRT5000L is reflective sensor which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package i..
Rs. 30.00
Hot
This 2 Pin Wire to Board connector are used widely for connecting Wires to Boards, It can be for Power Supply or connecting any other peripheral like ..
Rs. 4.00
Glue sticks are solid adhesives in twist or push-up tubes. The user can apply glue by holding the open tube, thus keeping their fingers clean. Because..
Rs. 15.00
Hot
Discontinued
The DS1307 Serial Real-Time Clock is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM, Real-time clock (RTC) ..
Rs. 35.00
This is a 14 pin IC Base with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use thi..
Rs. 8.00
Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! &n..
Rs. 12.00
This is a 18 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during prototyping. Also ..
Rs. 9.00
This is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during proto..
Rs. 12.00
24C04 512x8(4k) Serial CMOS EEPROM.
Features:
Low Voltage and Standard-Voltage Operation
2-wire Serial Interface
Schmitt Trigger..
Rs. 14.00
This is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during protot..
Rs. 12.00